Komatsu — TRAVELLING POSTURE

OPTIONS, ATTACHMENTS INTRODUCTION OF ATTACHMENTS AND EXTENDING MACHINE SERVICE LIFE Shape of ditch 38° bucket How to perform excavation Operate the boom, the arm and the bucket to make the line A of the side-plate of the bucket vertical. To check this position guide plate B is installed beside the bucket pins. Hold this plate horizontal when digging. TRAVELLING POSTURE Before starting to travel, be sure to pull in and lock the outriggers, and or raise the dozer blade. Before travelling on public roads, the work equipment should be positioned as follows: 1. Remove the bucket or attachment (refer to section see “REPLACEMENT OF BUCKET” on page 268.) 2.

Position the upper structure so that it is facing the front of the undercarriage (the oscillation lock cylinders can be seen) and insert the swing lock pin. 3. Fit link plate and spacers (Fig. 1) 271