SWITCHES OPERATION 7. DEFROSTER SELECTOR LEVER This is used to clear the mist from the front glass in cold or rainy conditions. Selector lever forward: Defroster (2) Selector lever back: Foot (1) 1 2 AA30814C The defroster can be used when the vent selector panel is at the position. PRECAUTION WHEN USING AIR CONDITIONER During cooling, ventilate the air from time to time. If operator is smoking during cooling, eyes may occasionally smart. In this case, temporarily change the switch to ventila- tion/cooling to exhaust the smoke. When cooling for a long time period, select ventilation/cooling once an hour. Avoiding excessive cooling.
If the operator feels somewhat cool when entering a cooled cab, the temperature (temperature difference between exter- nal temperature is 5° to 6°C) is at the optimum level from a health viewpoint. Adjust the cooling temperature carefully. FUSIBLE LINK If the starting motor will not rotate when the starting switch is turned ON, a possible cause is disconnection of wire-type fusible link. Open the door on the left side of the machine body to inspect the fusible link and, if necessary, replace it.
REMARK A fusible link refers to the large-sized fuse wiring installed in the high current flow portion of the circuit to protect electrical com- ponents and wiring from burning, similar to an ordinary fuse. 98