CHECK BEFORE STARTING See the section on CHECK BEFORE STARTING aforementioned. EVERY 100 HOURS SERVICE a. SWING MACHINERY CASE Inspect the oil level using dipstick (G), and if insufficient pour in addi- tional engine oil through the dipstick guide hole. * Insert dipstick (G) fully into the guide when checking the oil level. t Before supplying oil, remove air bleeding plug (1). After refilling, tighten Plug (1). * The type of lubricant used depends on the ambient temperature. Select according to the table “FUEL, COOLANT AND LUBRICANTS”. b. FUEL TANK Loosen valve (1) on the bottom of the tank so that the precipitation and mixed water will be drained in accompaniment with fuel. -126-