c. LUBRICATING Apply grease to the grease fittings shown by arrows. * If any abnormal noise is heard from any greasing point, add grease re- gardless of the service interval. * For the first 100 hours of operation of new machines, grease the boom cylinder foot pin and boom foot pin every 10 hours. 1. Boom cylinder foot pin (2 points) 2. Boom foot pin (2 points) 3. Boom cylinder rod end (2 points) 4. Arm cylinder foot pin (1 point) 5. Arm cylinder rod end (1 point) 6. Boom - Arm coupling pin (1 point) - 128-