Komatsu — EVERY 500 HOURS SERVICE

c. FUEL FILTER 1. Using a filter wrench, remove cartridge (1) by turning it counterclockwise. 2. Clean the filter holder, fill a new cartridge with clean fuel and refit it after applying a dab of clean engine oil to the packing face and thread. t To refit the cartridge, place the packing face in contact with the seal face of the filter holder, then screw up the cartridge 2/3 of a turn. 3. After replacing filter cartridge (I), loosen air bleed plug (2). 4. Loosen the knob of feed pump (3), then pump it up and down, and con- tinue until no more bubbles come out with the fuel from air bleed plug (2). 5. Tighten air bleed plug (2). * Always use genuine Komatsu filter cartridges.

* After replacing the filter cartridge, start the engine, and check that there is no leakage of oil from the filter seal surface. When starting the engine after it has run out of fuel, if the engine mis- fires, or black smoke comes out, bleed the air from the line as follows. 6. Loosen the connection of the fuel discharge port of the injection pump, and bleed the air in the same way as for the fuel filter. 7. After bleeding the air, tighten the fuel discharge port, then push in the knob of the feed pump and tighten it. -142-