Komatsu — WHEN REQUIRED

d. CHECK ELECTRICAL INTAKE AIR HEATER Check electrical intake air heater once a year before commencing work in the cold season. Remove 6 glow plugs (1) from the engine cylinder head, and check that there are no disconnections or dirt stuck to the plugs. e. TRACK SHOE BOLTS If the machine is used with track shoe bolts (1) loose, they will break, so tighten any loose bolts immediately. Method of tightening 1. Tighten first to a tightening torque of 20 & 2 kgm (PC300HD: 40 + 4 kgm), then check that the nut and shoe are in close contact with the link mating surface. 2. After checking, tighten a further 120” f IO”. Order for tightening Tighten the bolts in the order shown in the diagram.

After tightening, check that the nut and shoe are in close contact with the link mating surface. - 164-