Komatsu — TROUBLE SHOOTING GUIDE

Display condition of machine Abnormality in electrical system Only power source monitor lights up Abnormality in electrical system All lamps OFF Abnormality in electrical system If any abnormality occurs, lower the work equipment to the ground, check the display on the controller, then contact your Komatsu distributor for repairs, If it is thought that there is any abnormality or cause not listed above, please contact your Komatsu distributor for repairs. If there is more than one failure, the abnormality display shows each abnormality in turn, so check all of the abnoramlity codes.

When any abnormality occurs, always check the abnormality display of the controller before turning the starting switch to the OFF position. ENGINE THROTTLE CONTROLLER When normal (a): Red (b): Green (c): Red LED display L L L, Red Green Red Condition of machine OFF OFF ON For 5 seconds after power is switched on OFF ON OFF 5 seconds after power is switched on - 180-