AFTER STARTING THE ENGINE 1. Confirm that all gauges and warning devices are functioning correctly, and that the gauge readings are within the prescribed range. 2. Check the play and travel of each lever. 3. Operate the work equipment to confirm that they are functioning nor- mally. 4. Before operating the traveling and steering levers, check whether the track frame is forward or backwards. If the track frame is facing back- wards, operate the traveling and steering levers in the reverse manner to that when the track frame is facing forward. 5. Move the machine slowly and listen carefully to the engine or gears to confirm that they are not making any unusual noises. 6.
Choosing a safe place, turn the machine to the left and right to confirm that the traveling and steering levers are functioning normally. 7. If these tests reveal anything wrong, however slight is may be, contact the man in charge of the machine and operate the machine only after obtaining his permission. -6-