PARKING 1. When parking the machine, park it in a safe place outside the working area, or in the specified place. The following factors should be considered when choosing a parking place: it should be on flat, firm ground where there is no danger of rockfalls, landslides or floods. If the machine has to be parked on a slope, it should be parked facing directly up or down the slope, and chocks should be placed under the tracks. When the machine is facing downhill, lower the bucket so that it cuts slightly into the ground to further increase the safety. 2. If it is absolutely necessary to park the machine on a slope, park it facing downhill and put chocks against the tracks.
If the ground is soft enough, dig the bucket into the ground for added safety. 3. When parking the machine, return the work equipment levers to neutral, apply the brake lock, lower the bucket to the ground, and put all safety levers in the lock position. Switch off the engine and remove the key. 4. Before leaving the machine, carry out the following: * Apply the swing lock. * Lower the bucket to the ground. t Put the work equipment lever in neutral and lock it. * Stop the engine and remove the key to prevent other people using the machine. * Lock the cab. - 16-