Komatsu — PRECAUTIONS FOR MAINTENANCE

PRECAUTIONS FOR MAINTENANCE 1. Wear proper clothes Loose clothes, ornaments or other things that may possibly contact the control lever or other machine parts must not be worn. Do not let you clothes get caught on protruding parts of the machine. Do not wear oily clothes since they may catch fire. 2. Wear well-fitting helmet, safety shoes and working clothes. When drill- ing, grinding or hammering, always wear protective goggles. 3. Fuel or oil are dangerous substances. Never handle fuel, oil, grease or oily clothes in places where there is any fire or flame.

As preparation in case of fire, always know the location and directions for use of fire extinguishers and other fire-fighting equipment. 4. Do not handle electrical equipment while wearing wet gloves, or in wet places, as this can cause electric shock. 5. During maintenance do not allow any unauthorized person to stand near the machine. 6. Exhaust gas is dangerous. When working inside, be particularly careful to have good ventilation. 7. Unless you have special instructions to the contrary, maintenance should always be carried out with the engine stopped. Apply the swing lock and also all of the safety levers.

If maintenance is carried out with the engine running, there must be two men present: one sitting in the oper- ator’s seat and the other one performing the maintenance. In such a case, never touch any moving part. 8. When working underneath, the machine, place a sign to that effect on the operator’s seat and, if necessary, put a similar signs in the vicinity as well. 9. Do not go underneath the machine after raising it up using the boom and the arm. 10. When working with others, choose a group leader and work according to his instructions. Do not perform any maintenance beyond the agreed work. 11.

When maintenance has to be carried out with the work equipment raised, they must be securely supported by blocks. 12. Always remember that the hydraulic oil circuit is under pressure. When feeding or draining the oil or carrying out inspection and maintenance, release the pressure first. - 46 -