When normal No. Input mode and condition Display 0 Power source monitor (with starting switch ON Lights up H mode \_\ \ 1 0 Power mode S mode \I -\ L mode \ (_ 0 Engine speed signal monitor (when engine is running) Flashes Heavy-duty operation mode \ \ General operation mode 3 \- @ Working mode Finishing operation mode -\ 3 Lifting operation mode \\ -\ Sr The combinations given in the table above are displayed according to the input mode and machine condition. * Engine speed signal monitor (3) flashes according to the engine speed. (At 2000 rpm, it flashes approx. 20 times/IO set) * When switching the input, the following display is given.
When switching input Display When electric power is switched on (0.5 set) .- \_ . \_\ Hi \\ .\-\. \ Switching travel speed Lo !I_ .\‘I\ Auto-deceleration switch \-\ \ .\-\ .\3 Swing lock switch Work equipment, Swing control lever \3 3 .\ .\- Service control lever \-\ \ \ .r .“I The display is given for 0.5 - Travel lever \3 \5 .\ .\A switched. 1.5 set after the input is Power max. button \ \ \2 .\A.\ - 42 -