Komatsu — TRANSPORTATION

DIVIDING THE MACHINE To simplify transportation, the machine can be divided into the body, at- tachments, and counterweight. Before transporting a machine, consult your Komatsu distributor. The following points when dividing a machine. t When disassembling the attachments, take care not to let dust get into the joints of the piping. After removing the attachment, plug or tape the joints. * After packing, check for water leakage and oil leakage. Refill if necessary. * Fix each section securely to protect cylinders and other parts. * Reinstall the pins and bolts which were removed for disassembly. A The lifting hooks on the counterweight should only be used when rais- ing the counterweight.

Never use the lifting hooks on the counterweight to raise the machine itself. 0 Detachment sites: I-l Boom lamp and associated wiring. I-2 Cylinders and associated piping. I-3 Boom cylinder foot I-4 Boom foot I-5 Counterweight II-1 Bucket cylinder piping II-2 Arm cylinder rod end II-3 Boom-arm junction III-1 Link-bucket junction III-2 Arm-bucket junction - 92 -