Mack Trucks — PV776-21394653.pdf

96 Operator’s Manual Vehicle Maintenance CXU, CHU, GU, TD, MRU and LEU Rib Sidewall Glazing When the belt ribs appear to have a shiny surface that is hard and brittle, it is usually an indication of belt slippage. This is attributed to inadequate tension and/or extreme temperature. Both these conditions will lead to severe cracking and belt failure, often with little advance warning. If this occurs, locate the cause and correct before installing a new belt. Belt Wear Accelerated wear on any part of the belt (fabric backing, tensile cord or rib rubber) is a concern and should be investigated for cause, and corrected before installing a new belt.

Possible Causes of Accelerated Belt Wear Drive Misalignment Belt performance will be adversely affected when misalignment exceeds 1/16 inch for every 12 inches of belt span. Belt Length Must be correct. Environmental Conditions Temperature, exposure to engine fluids, etc. Abrasive Materials Small stones, metal shavings, etc. W0054006