Mack Trucks — PV776-21394653.pdf

Operator’s Manual Vehicle Maintenance CXU, CHU, GU, TD, MRU and LEU 105 Check for metal-to-metal contact between the arm and the end cap. Replace if contact is seen. W0054016 Checking for Contact Between Arm and End Cap Check for cracks in the tensioner body or for broken stops on the spring case. If either is seen, replace the tensioner. Reinstall the belt making sure that the belt is properly seated in the grooves of ALL pulleys. CAUTION If an automatic belt tensioner must be replaced, make sure that the proper tensioner is used. Tensioner spring tension varies by engine and chassis model. Do not substitute one tensioner part number for another, as drive belt failure can result.