Operator’s Manual Vehicle Maintenance CXU, CHU, GU, TD, MRU and LEU 73 1 Unlock the primer pump handle by pushing the handle downward and then turning it counterclockwise. W0054026 2 Operate the pump handle until pumping effort increases. Unlocking Fuel System Primer Pump Handle W0054027 Note: With a fuel system that is completely empty, 200 or more strokes of the pump may be necessary to properly prime the system. Pumping Hand Primer Pump 3 When the fuel system is primed, lock the primer pump handle by pushing it fully into the housing and turning it clockwise. 4 Start the engine and run it at 1000 rpm for approximately 5 minutes to purge any remaining air from the system. Note:
If the engine does not start after performing the above priming procedure, contact your local MACK dealer for assistance.