01 Engine 0120 Cylinder head / Valves / Idler gear Technical specifications 1044-004 a d b c 1 234588-001 179 Checking ►Remove valves. Page 130 144 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 Value CCN Remark / designation 1 Valve guides Observe check dimensions (a) to (d)! a Bore diameter of valve guide in built-in condition Standard: 8.000 to 8.022 mm b Outer diameter of valve guides Standard version: 14.028 to 14.046 mm Version deviation 0.2: 14.228 to 14.246 mm c Bore diameter in the cylinder head Standard: 14.000 to 14.018 mm Deviation 0.2: 14.200 to 14.218 mm d Clearance between valve guide top edge and valve spring contact face Intake: 13.7 to 14.5 mm Exhaust:
17.2 to 218.0 mm Tightening torques not specified, see section on tightening torques