01 Engine 0125 Injection - / Fuel system Technical specifications 1044-004 2 6 5 4 3 1 4 7 1 2 235229-001 202 160 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 Value CCN Remark / designation 1 Inlet connector – Ensure that the inlet connector is inserted into the cylinder head so that it engages in the fuel bore of the nozzle holder combination (4). – Replace O-ring (3) in every installation process. 2 45 Nm Thrust bolt – Slightly coat the thrust bolt with engine oil. 3 O-ring – Slightly grease the O-ring. 4 Nozzle holder combination – Observe the installation position relative to the inlet connector (1). – Replace O-ring (5) in every installation process.
5 O-ring – Slightly grease the O-ring. Tightening torques not specified, see section on tightening torques