mercedes-benz — Installation

01 Engine 0130 Lubricating oil system If the oil cooler unit was removed: 1044-004 ►Screw in the bolts joining the oil cooler unit with the oil cooler housing cover only hand-tight. ►Insert oil cooler (2) with a new seal. 2 ►Screw in bolts (1). Tightening torque: Page 189 ►Connect cable connector of sensors (B11-MB) and (B12-MB). 1 B11-MB B12-MB 255 235920-001 ►If required, tighten bolts between oil cooler unit and oil cooler housing cover. Tightening torque: Page 189 ►Screw on oil filter lid (1). Tightening torque: Page 189 ►Install oil line (2). See turbocharger chapter: Page 219 1 2 235919-001 256 ►Install the air intake line (2). See the repair manual of the machine in question.

►Install vent line (1). 2 1 257 235918-001 ►Top up coolant. Page 199 ►Pre-fill the lubricating oil system. Page 178 ►Top up engine oil as specified in the relevant Operator's Manual. ►Start the diesel engine. ►Check the oil pressure. 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 191