01 Engine 0140 Exhaust system - Unscrew the NOx sensor. Remove the temperature sensors in the following order: - Disconnect the connectors of wiring looms. - Unscrew the temperature sensors. Installation of sensors: 1044-004 Install the NOx sensor unit in the following order: - Screw on the NOx sensor. - Screw on the NOx sensor module. Install the temperature sensors in the following order: - Screw on the temperature sensors. - Connect the connectors of wiring looms. 230 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014