mercedes-benz — Checking the urea solution (density)

01 Engine 0165 Exhaust gas treatment Checking the urea solution (density) 1044-004 This check establishes the density of the urea solution. The usable urea solution consists of 32.5 % urea and 67.5 % distilled water. When the water portion is too high, the function of the exhaust gas treatment system will be affected. ►Disconnect the battery isolating switch of the machine. ►Wait for at least five minutes after stopping the diesel engine for the residual pressure in the system to be relieved. ►Remove urea filter as described in the relevant Operator's Manual. ►Use the pipette (1) of special tool (I) and withdraw a urea solution sample from the removed filter and from the urea tank.

►Put the withdrawn sample on the refractometer prism (2). ►The white area is to stop at the characteristic curve (3) of the urea solution. When the white area is below the characteristic curve (3), the urea solution does not contain the specified percentage rate of urea. I 2 1 When the white area is slightly above the characteristic curve (3), this can be considered as normal, depending on the urea solution producer. 371 165550-001 3 372 165551-001 ►Install urea filter as described in the relevant Operator's Manual. 262 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014