01 Engine 0165 Exhaust gas treatment Installing the dump valve 1044-004 ►Install new O-rings on the dump valve. Coat O-rings with silicone grease. ►Ensure that drilled holes (2) are not clogged. 2 1 1 186197-001 394 ►Screw the screw (2) into the dump valve (1) until the stop is felt. Screw M5x50 mm ►Insert dump valve (1) by means of screw (2). ►Ensure that no dirt can enter the drilled hole. ►Insert axial O-ring (3). 3 2 1 395 186194-001 ►Screw on screw fitting (1). Tightening torque: Page 267 1 396 186191-001 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 273