01 Engine 0165 Exhaust gas treatment Filling the accumulator 1044-004 ►Fit special tool (II) on the valve at (1). ►Read the pressure and adjust if required. Pressure: Page 267 ►Set the pressure 0.2 bar higher as a slight pressure loss cannot be avoided when disconnecting the pump. ►Pumping = Increasing the pressure. ►Pressing the relieve button = Reducing the pressure. In case of a new pressure accumulator: 1 II ►Remove special tool (II). In case of a re-used pressure accumulator: ►Remove special tool (II). ►Refit special tool (II) again after waiting for 5 minutes. ►Read the pressure. In case of pressure loss, the pressure accumulator must be replaced.
►Set the pressure 0.2 bar higher again. Pressure: Page 267 ►Remove special tool (II). 186222-001 403 276 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014