01 Engine 0110 Engine housing ►Drill two Ш 3 mm holes into seal (1). 1044-004 1 ►Screw two self-tapping screws 4.8x25 mm into the bores. ►Pull out the seal (1) at the self-tapping screws. 188521-001 60 ►Check the contact face of the radial seal on the crankshaft flange. ►When run-in traces exist, replace the crankshaft. Page 101 Installation ►Use special tool (I). Page 68 ►Slide the new seal (1) over mounting sleeve (2). Apply a little oil to the seal on the inside only. ►Ensure that the dust lip (arrow) makes complete contact with the mounting sleeve. 2 1 188536-001 61 ►Clean the sealing faces on the crankshaft flange (1) and on the oil pump housing (2).
Page 19 ►Screw on punch (3) on the crankshaft flange (1), using bolts (4). 1 3 4 4 2 62 188537-001 70 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014