01 Engine 0110 Engine housing ►Remove sensor (B15-MB). 1044-004 B15-MB 188604-001 73 ►Ensure that all wiring looms and lines have been removed from the timing housing (2). ►Suspend the timing housing (2) in a suitable lifting equipment. ►Unscrew all bolts (1). 2 ►Remove timing housing (2) carefully from the crankcase. 1 188605-001 74 ►Clean the sealing faces. Page 19 ►Remove the crankshaft rear seal. Page 73 Installation ►Install a new crankshaft rear seal. Page 74 Use special tool (I). Page 76 ►Apply special tool (I) at the sealing faces. 1 ►Suspend the timing housing (1) in a suitable lifting equipment and carefully place it next to the crankcase. ►Bolt down all bolts (2).
Tightening torque: Page 77 I 2 75 188606-001 78 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014