01 Engine 0115 Engine unit ►Assemble piston (2) and connecting rod (3) by inserting the piston pin (1). ►It must be possible to push the piston pin (1) into the piston easily with the fingers and the piston pin must not slide out again due to its own weight. ►Apply a little oil to the piston pin. ►Observe the installation position. ►In addition, observe the specifications of the "Connecting rod" chapter. Page 91 ►Insert circlips. 1044-004 1 2 3 181396-001 89 1 a2301248 90 171363-001 Use special tool (II). Page 82 ►Install piston rings (1). ►Observe the installation position of the different piston rings. ►See technical specifications: Page 84 ►Ensure that the "TOP" mark (2) points upwards.
►Ensure that the joint ends of the piston ring are installed with a 120° offset with respect to one another. II 1 2 91 181508-001 Installation ►Check the cylinder bore. Page 95 ►Check connecting rod bearing pin of the crankshaft. Page 102 88 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014