Introduction General repair instructions ►Apply the glue only in the areas shown in the figure if possible. When applying the glue at an unfavourable spot or when applying too much glue, the joint may tear off when loosening. ►Observe the glue producer's instructions for use and application! A joint secured by liquid locking compound can be loosened by heating up to approx. 200 °C. 1044-004 120771-004 Steel roller chains Tensioning Checking the tension of steel roller chains: A ►Apply a small load to the tight span. ►Push down the slack span in the middle between the sprockets with your thumb. You should be able to push down the slack span around 2 % of the spacing between the axles.
Example: Axle spacing (A) = 500 mm x Pushing distance (x) of slack span = approx. 10 mm 2 13827-006 Chain connector ►The closed side of chain connector (1) must point in running direction (L)! 1 3 123668-001 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 9