mercedes-benz — Checking

01 Engine 0115 Engine unit 1044-004 Removal ►Remove the piston. Page 85 ►Disassemble the piston. Page 86 Checking ►Check the connecting rod bearing inner diameter (a). ►Check the connecting rod bearing inner diameter on the assembled connecting rod. ►Check the measuring positions in the specified order (1., 2. and 3.). ►The second and third measuring positions are twisted by around 60° each relative to the first measuring position. ►Calculate the average value from the three measured values. ►Checking the connecting rod play (b):

►When subtracting the mean diameter value of the connecting rod bearing pin from the mean value of the connecting rod bearing inner diameter, the connecting rod play is obtained. ►Example: ►Connecting rod bearing inner diameter: 94.062 mm ►Diameter of connecting rod bearing pin: 93.990 mm (see technical data of crankshaft Page 99 ) ►b = 94.062 mm - 93.990 mm = 0.072 mm 92 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 Value CCN Remark / designation a Connecting rod bearing inner diameter (with the connecting rod bearing shells inserted) Standard: 70.054 to 70.093 mm Deviation 0.1: 69.954 to 69.993 mm Deviation 0.25: 69.804 to 69.843 mm Deviation 0.5:

69.554 to 69.593 mm Deviation 0.75: 69.304 to 69.343 mm Deviation 1.0: 69.054 to 69.093 mm b Connecting rod play Radial: 0.039 to 0.098 mm Axial: 0.170 to 0.470 mm c up to 57.0 mm Shaft length of connecting rod bolt (4) Tightening torques not specified, see section on tightening torques