SAFE OPERATION - 4 12.When towing other equipment, use a safety chain and place an SMV emblem on it as well. (1) Safety chain 13.Set the implement lowering speed knob in the "LOCK" position to hold the implement in the raised position. (1) SMV emblem (2) Bracket 5. Observe all local traffic and safety regulations. 6. Turn the headlights on. Dim them when meeting another vehicle. 7. Drive at speeds that allow you to maintain control at all times. 8. Do not apply the differential lock while traveling at road speeds. The tractor may run out of control. 9. Avoid sudden motions of the steering wheel as they can lead to a dangerous loss of stability.
The risk is especially great when the tractor is traveling at road speeds. 10.Keep the ROPS in the "UP" position and wear the seat belt when driving the tractor on the road. Otherwise, you will not be protected in the event of a tractor roll-over. 11.Do not operate an implement while the tractor is on the road. Lock the 3-point hitch in the raised position. (1) 3-point hitch lowering speed knob (A) "FAST" (B) "SLOW" (C) "LOCK" 3. PARKING THE TRACTOR 1. Disengage the PTO, lower all implements to the ground, place all control levers in their neutral positions, set the parking brake, stop the engine, remove the key from the ignition and lock the cab door (if equipped).
Leaving transmission in gear with the engine stopped will not prevent tractor from rolling. 2. Make sure that the tractor has come to a complete stop before dismounting. 3. Avoid parking on steep slopes, if at all possible park on a firm and level surface; if not, park across a slope with chock the wheels. Failure to comply with this warning may allow the tractor to move and could cause injury or death.