BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Driving and Operation The keyless start/stop button is located on the auxiliary fascia console. view mirrors to the appropriate posi- tion. Start Start the vehicle Cautions Confirm that all lights on the vehicle are working properly. Power Mode Switch Switch the gear to P or N, press the keyless start/stop button without stepping on the brake pedal, and the power mode will switch in the following sequence: Attention Confirm that the combination instru- ment is working properly. Make sure all windows, exterior mir- rors and exterior lights are clean. When the keyless start/stop button is in "RUN" mode, are the warning lights functioning normally? When the button is not pressed:

the keyless start/stop button is OFF, which is OFF mode. When the button is pressed for the first time: RUN mode is activated, the inst- ru-ment is ON, and all electrical equip- ment is ON. When pressing the button for the second time: Return to "OFF" mode. Check the condition of the tires and con-firm that the tire pressure is normal. Check the bottom of the car for fluid leaks. When reversing, ensure that there are no obstacles behind the vehicle. The oil level (such as engine oil, engine coolant, brake fluid, windshield washer fluid, etc.) should be checked regularly Close all the doors. Adjust the seat to a proper position.

Wear your seat belt correctly Adjust the interior and exterior rear Release the parking brake and confirm that the parking brake indicator light goes out. Keyless start/stop button Press the keyless start/stop button one after another to cycle through the two modes: "OFF" → "RUN" → "OFF". Attention The READY indicator light is ON in the instrument cluster, indicating that the ve-hicle is ready. 106 | Driving and Operation