Driving and Operation When the battery is too low to start the engine, you can try using a jumper cable to connect to another vehicle's battery to start the engine. If the vehicle cannot be prepared (READY light on the combination instrument goes on), please check if the battery voltage is sufficient and use an external auxiliary starting device to start the vehicle again. If the vehicle preparation still cannot be completed, please contact a BAIC autho-rized dealer immediately for repair.
When the vehicle is in an area with strong signal interference, using the “Backup Start” function to drive the vehicle out of that area will resume the normal opera-tion without the “Key- less Start” function. Description of gear positions The shift handle includes the following gears: P (Park) R (Reverse) N (Neutral) D gear (forward gear) When the vehicle is in P or N, press the brake pedal, place the smart key in the central arm- rest with the emergency start symbol, and press the “Keyless Start/Stop” button to start the vehicle.
Emergency flameout Press the brake pedal and within 2s, press the “Keyless Start/Stop” button twice con- secutive-ly or press and hold the “Keyless Start/Stop” button for more than 2s to emer- gency shut off the vehicle. Smart knob backup start function If the vehicle is in an area with strong signal in-terference or if the smart key battery is low and the vehicle cannot be started by pressing the “Keyless Start/Stop” button, the backup start function should be used. Operate the shift handle to move forward or backward to switch gears. P (Park) Attention Backup startup function scope: When the battery level of the smart key is low and the battery cannot be replaced promptly.
108 | Driving and Operation