Driving and Operation the gear is switched to R. - When the vehicle speed is ≥1km/h and the vehicle speed is ≤7km/h, pull the shift handle backward to the ② position and release it. At this time, the gear is switched to D. Switch D to R: - With the vehicle stationary, while depressing the brake pedal, push the shift handle forward to the ② position and release it. At this time, the gear is switched to R. - When the vehicle speed is ≥1km/h and the vehicle speed is ≤7km/h, push the shift handle forward to the ② posi- tion and release it. At this time, the gear is switched to R.
Attention After the vehicle is started, you can press the brake pedal and operate the electronic shift handle to shift gears. The current gear information will be displayed on the instrument cluster. After shifting gears, be sure to con- firm the gear position through the instrument cluster. If the gear combi- nation displayed by the instrument cluster is different from expected, re-confirm the gear position or shift gears again. Switch to "R" gear Switch P to R: When the vehicle is station-ary, push the shift handle forward to the ② position and release it. At this time, the gear is switched to R. Switch N to R:
- With the vehicle stationary, while depressing the brake pedal, push the shift handle forward to the ② position and release it. At this time, the gear is switched to R. - When the vehicle speed is ≥1km/h and the vehicle speed is ≤7km/h, push the shift handle forward to the ② posi- tion and release it. At this time, the gear is switched to R. - When the vehicle is sliding back- wards and the vehicle speed is >7km/h, push the shift handle forward to the ② po-sition and release it. At this time, Attention When the driver makes a mistake in gear shifting, the instrument cluster will emit a short beep and correspond- ing gear shifting reminder text.
If the driver makes a mistake in shifting gears, the gear will stay in the original gear. If you need to change gears while driv-ing, do not step on the accelera- tor pedal to avoid accidents. Before leaving the vehicle or on a slope, make sure you are in Park (P). When switching gears to D/R, you need to start the vehicle. Driving and Operation | 111