BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Driving and Operation Warning 3. Fully depress the brake pedal with your left foot and depress the accelerator pedal with your right foot. The instrument will prompt the user: Ejection launch mode is enabled, please wait. Attention Please drive carefully within the scope permitted by relevant laws and regla-tions. Water depth detection is only a Driver Assistance function and may have false alarms due to its operating principle. The driver needs to discern the actual envi-ronment and cannot replace the driver’ s judgment of the safety of the vehicle’ s surroundings.

The water depth detection system mea- sures the water level on the vertical line between the exterior rearview mirrors and the ground. The simulated display on the screen of the in-vehicle infotain- ment system shows the maximum water depth detected by the sensors on the left and right sides of the vehicle. 4. After the loading is completed, the instru- ment will prompt the user: Please release the brake quickly to complete the ejection start. 5. At this time, the driver releases the brake pedal with his left foot to complete the ejection start. After entering sand mode, the ESC system is turned off and will not be able to provide support for vehicle stability. Please drive with caution.

Ejection start mode Water depth detection system* This mode enables the vehicle to achieve maximum acceleration and starting perfor- mance. When rotating the knob to switch to the Water mode, the water depth detection func- tion is activated. In this mode, the system can detect and simulate the water depth below the area beneath the exterior rearview mirrors. When the wading mode is switched to other driving modes, the water depth detection system is OFF. 1. The vehicle is in the READY state, there is no fault in the vehicle, the driver fastens his seat belt, engages the D gear, the electronic parking brake system is released, and the driving mode is the sport mode.

The status of “Mirror Folding, System Temporarily Disabled” follows the state of the exterior rearview mirror adjusting switch. If the mirrors are manually unfolded or folded, the system cannot accurately identify the status and requires the driver to rotate the external mirror adjusting switch to the actual position. 2. Hold the steering wheel with both hands and return the steering wheel to the straight position. Driving and Operation | 131