Trip preparation Check before travelling It is best to conduct a safety inspection before setting off on the vehicle, A few minutes of inspection will help drive safely, These inspections can be performed only by basic familiarity with each part of the vehicle and careful observation. Before starting the vehicle External of vehicle Tire: Check the tire pressure and whether the tires have cuts, damage or excessive wear, or bulges. Lights: Make sure headlights, brake lights, reverse lights, turn signals and other lights are all working properly. Inspect headlamp lightening direction. Wheel nut: Make sure no nuts are missing or loose. Inside of engine compartment Oil level:
Ensure that all fluid levels in the vehicle are normal, such as the terminals are corroded or loose, and whether the cable connections are in good condition. Interior of vehicle Check to make sure the lock tongue and buckle can be fastened securely. Make sure the seat belts are free of wear or damage. In particular, make sure that the instrument indicators and the defrost/defogging function are working properly. After starting the vehicle Before driving Park the vehicle for a while, and check the vehicle bottom for fuel, oil, water or other fluid leakages. If the air-conditioning drips after being used, this is normal. During Driving Instrument:
Ensure that the red and yellow warning lights on the combination instrument do not illuminate. Brake: Drive at a low speed and depress the brake pedal under safe conditions to check if the brakes are reliable, the vehicle does not deviate, and there are no abnormal noises from the brakes. Noise: Inside the trunk: Battery: Check whether there are any cracks in the battery case, whether 10 | Trip preparation