BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Driving and Operation Start and close the adaptive cruise 1. Set car following headway. 2. Set cruise speed. 3. 4. This car. Attention Click the vehicle settings button on the center console After the adaptive cruise function is activated, the following conditions must be met for the adaptive cruise to work properly: The gear is in D gear. The engine is running. The electronic parking brake is not ap plied. The brake pedal is not depressed. The ESC function is not turned off. The vehicle runs stably and the EPB sys tem is not involved; Brake temperature is not too high due to frequent braking; The driver's door and engine hood are not open.

The driver's seat belt is not unfastened; > Driving Assist > Intelligent cruise. The adaptive cruise function can be started/ closed, and the vehicle can be selected in front departure prompt and target prompt sound. When the Integrated Adapted Cruise Con- trol system is activated on the central control screen, the Adaptive Cruise Control indicator Activate/Exit ACC When ACC is ON and the system meets the activation conditions, ACC can be activated by pulling the cruise control lever toward the steer- ing wheel or moving the lever up or down. At (white) in the combination instrument goes on, indicating that the ACC system is in stand- by mode.

h, the current vehicle speed is set as the target vehicle speed; if the current vehicle speed is cle speed. At this time, the adaptive cruise indi- cator light Open the interface: Outdoor: 24 10:37 p.m. (green) in the instrument cluster is ON and ACC is activated. Spot Standard- ized by 146 | Driving and Operation