BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Driving and Operation If the vehicle stops for more than 90s but with- in 10 minutes, the driver needs to step on the accelerator pedal or pull back the cruise control lever to reactivate ACC. If the vehicle stops for more than 10 minutes, the ACC system will enter standby mode and the electronic parking brake function will be turned on. Integrated Adapted Cruise Control system When the driver steps on the accelerator pedal to actively increase speed, the ve- hicle will be taken over by the driver and the ACC vehicle-vehicle distance control function will be inhibited. Attention Before running IACC, please read carefully and become familiar with the all contents of this chapter.

Integrated Adapted Cruise Control (IACC) provides the driver with longitudinal and lateral vehicle assistance throughout the full speed range. The longitudinal assistance is achieved by the Adaptive Cruise Control (ACC) system, which controls the vehicle to follow the pre- ceding vehicle within the speed range of 0km/ h to 150km/h and maintains a set speed cruise within the range of 20km/h to 150km/h. The time gap between the vehicle and the preceding vehicle can also be set. The IACC operating speed range is 0km/ h~150km/h. IACC performs lateral assist con- trol by identifying clear lane lines on both sides of the lane. At this time, IACC is in lane line control mode.

The instrument IACC icon is dis- played in green and the lane lines are displayed in green. Fault handling When the ACC is activated, pressing the accel- erator pedal will cause the vehicle to accelerate continuously according to the depth of the pedal. When the driver releases the accelerator pedal, the ACC will adjust and maintain the ve- hicle speed to the set target speed. If the vehicle speed exceeds 150km/h or the accelerator pedal is continuously pressed for more than 15min, the system will enter standby mode and the ACC needs to be reactivated.

When the CC is activated, depress the brake pedal, the vehicle will continue to decelerate, and the ACC system will automatically enter the standby state. After releasing the brake ped- al, the ACC needs to be reactivated. the ACC system When the system detects a fault, the cruise status indicator light is ON on the instrument cluster . If a fault occurs and the fault warning persists for a long time even after restarting the vehicle, please contact an authorized dealer of Beijing Automotive for assistance. In the following situations, be sure to go to an authorized Beijing Auto dealership for profes- sional camera calibration: The vehicle was involved in a collision.

The performance of ACC is degraded (For example, the distance to the detected target is abnormally shortened or vehicles in the The early warning auxiliary brake system functions abnormally (such as frequent false alarms or brake, etc.). 148 | Driving and Operation