BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Driving and Operation Start/close the Integrated Adapted Cruise Control Display Interface IACC status. In standby mode, the IACC standby indicator Outdoor: 24 10:37 p.m. (white) goes on. Click the vehicle settings button on the center console > Driving Assist > Intelligent cruise. You can Start and close the adaptive cruise function and select the target sound for the ve- hicle in front leaving. When activating the Integrated Adapted Cruise Control system on the central control screen, the two cruise indicators in the combination instrument go on, indicating that the Integrated Adapted Cruise Control system is in standby mode.

Users can also select the sensitivity of IACC through the alarm sensitivity of the lane assist system on the center console. Spot 3. The identified target vehicle will be high- lighted after the system identifys it. 4. Other target cars. 5. from the vehicle in front, which is dis- played in green. 6. This car. Activate/Exit IACC Standard- ized by When the cruise main switch is ON and the sys- tem meets the activation conditions, first acti- vate ACC by moving the cruise control lever to "SET/RES" or "SPD+" or "SPD-". At this time, 1. Indicates the longitudinal control ACC sta- tus, whether the vehicle in front is detected, the set cruising speed and the car-follow- ing headway.

In standby mode, the ACC standby indicator Set the current vehicle speed as the target vehi- (white) goes on. Once the ACC is activated, the ACC operational indicator h, set 20km/h as the target vehicle speed. The ACC working indicator light (green) goes on. The number of horizontal lines below the indicator rep- resents the driver’s set time gap: 1st Gear, 2nd Gear, 3rd Gear, 4th Gear. 2. When both longitudinal control and lateral control are activated, the IACC operational indicator (green) is ON in the instrument cluster and the adaptive cruise function is activated.

To activate the IACC, tog- gle the cruise control lever to “SET/RES." The IACC operational indicator (green) in the combination instrument is ON, indicating the activation of the IACC function. (green) goes on, indicating the Driving and Operation | 151