Driving and Operation car, enter the settings menu, and select the "Format SD Card" command to complete the format. Enter the automobile data recorder After the vehicle is powered on, it can be synchronized with the time information of the video recording screen of the driv- ing recorder through the CAN bus. It is recommended to insert and remove the memory card when the vehicle is not started to use a personal computer to Attention Click the application center button on the center console Formatting through the computer: Insert the TF card into the computer through the card reader and select the format command. Select "FAT32" as the file system format. The allocated cell size must be >4KB.
Nor- mally, the default mode is used, and other options also use the default mode. > automobile data recorder. You can enter the automobile data recorder interface. General recording function "Re- cord ON". When the recording function is activated, recording is OFF by default. If the recording function is set to be turned off, the DVR will not record the video data of general recording. In the next ignition cycle, recording will be restored by default, and the REC red dot click Click "Record OFF" "Record ON", click "Record OFF", and click memory card. It is not recommended to insert and remove the memory card while the vehicle is starting.
Attention The automobile data recorder only re- cords external images and photos, and records internal audio is OFF by default. automobile data recorder videos and pic- tures can be uploaded to the cloud end and viewed through the Yueyequan APP. The automobile data recorder needs to be equipped with a FAT32 format memory card. It is recommended that the memo- ry card is 32GMicro SDHC, 32GMicro SDXC. Memory cards of other formats or capacities will not guarantee the normal recording and copying of the automobile data recorder.
If the memory card is inserted or removed during the recording of the automobile data recorder or the vehicle is unexpect- edly powered off, the current video will stop recording and the video and photos recorded in this part may be lost. Circuit recording By default, the recording mode is set to loop recording. The loop recordings are stored in the loop recording folder, and when the folder is full, the earliest video will be overwritten by the latest video. The video button cannot be operated during the emergency recording process. You can continue to operate it after the emergency recording is completed.
All functions of the automobile data re- corder are realized based on the TF card Emergency recording function is not used as required, the system may not operate normally and cause system failure. Emergency recording triggering methods are divided into automatic triggering and manual triggering. When the vehicle is subject to emer- gency braking, collision and yaw, DVR will Driving and Operation | 187