Maintenance Wiper replacement When the wiper maintenance is activated, the wiper will automatically move to the mainte- nance position. The front wiper blade can be replaced as follows: 1. Raise the wiper arm off the windshield. Pad the lower part of the wiper arm with a thick towel to prevent the wiper arm from accidentally rebounding and damaging the windshield. After removing the wiper blades, exercise extra caution. Place a thick towel under the lower part of the wiper arm to prevent it from accidentally snapping back and damaging the windscreen. Attention 4. Replace the wiper blade with a new one. 5. Insert the wiper blade into the groove of the wiper arm.
When you hear a "click" sound, it means it is installed in place. 6. Check that the wiper blade is installed re- liably, remove the towel, and gently return the wiper arm to its original position. 7. Switch the keyless start/stop button to "RUN" mode and turn off wiper mainte- nance through the center console. Attention When performing this operation, make sure that the power in the car is OFF to prevent the wiper from being accidentally triggered, damaging the wiper arm or causing personal injury. When maintenance operations are required on the wipers, the wipers must be opened for inspection and repair. This is to avoid personal injury or vehicle damage caused by sudden wiper operation.
When the wipers are turned on for inspection and repair, the wipers will auto- matically move to the maintenance position. Click the vehicle settings button on the center console 2. Gently press and hold the wiper blade lock- 3. Hold the wiper blade in the pointing direc- tion and remove it with slight force. > Doors and Windows > Windows. The on/off function for wiper maintenance can be set. Maintenance | 215