BAIC — BAIC Bahrain Операционная инструкция: Руководство пользователя и обслуживание

Maintenance Recommended SAE viscosity values for en- gine oils Engine oil level check method 1. 2. Start the engine and warm it up until the engine temperature reaches normal operat- ing temperature (about 5 minutes); 3. Turn off the engine and wait at least 10 : Engine oil upper limit mark : Engine oil lower limit mark Every engine will consume a certain amount of oil which depends on the driving patterns and driving conditions. Therefore, regularly check the oil level. You’d better check the oil level while refueling and before long drive.

When the vehicle is driving long distances on the highway or in mountainous areas in sum- mer, and the engine is running under such harsh conditions, the engine oil level must not exceed the upper limit mark A. Please choose the appropriate engine oil ac- cording to different ambient temperatures. Engine oil pressure alarm light If the warning light for engine oil pressure remains illuminated after the engine is started up, it indicates a fault in the engine lubrication system. The engine should be immediately shut down, and the engine oil level should be checked. the oil pan. 4.

Pull out the engine oil dipstick in a vertical direction, wipe off the oil stains on the dipstick with a clean rag, and reinsert the engine oil dipstick to the bottom; 5. Once again, pull out the oil dipstick and check if the oil level is between the upper and lower marks. If the engine oil level is normal but the warning light is still on, do not continue driving. At this time, you should shut down the engine and contact a BAIC authorized dealer to inspect the engine lubrication system. 1. 2. Open the hood 3. Remove the engine trim cover ; 4. Attention engine oil from dripping onto the engine.

Continuing to drive with the illuminating warning light for engine oil pressure will cause severe damage to the engine. 222 | Maintenance