Emergency Treatment When towing a vehicle, it is essential to do so under the guidance of a profession- al to prevent unnecessary harm. The towing vehicle must not be lighter than the vehicle being towed, as it may result in loss of control. Before towing, you should turn on the ig- nition switch of the towed vehicle, switch the gear to the "N" position, and release the parking brake at the same time. The towing vehicle should gradually ac- celerate after starting to drive, allowing the towing rope to become taut. If braking becomes necessary during the journey, the driver of the towed vehicle should apply the brake pedal gently in advance.
If the vehicle being towed is difficult to move, do not continue to tow forcibly. Contact an authorized dealer of Beijing Automotive for assistance. It is important to avoid excessive or abrupt towing force. The towing rope must always be kept taut. Towing on uneven surfaces may overload and even damage the towing connection point. Attention Using steel wire ropes, metal chains, or metal tow bars to tow the vehicle may cause damage to the vehicle body. It is recommended to use a dedicated towing rope for towing the vehicle. Ensure that the towing rope remains in a straight line with the front and rear ve- hicles. Towing at an angle may result in damage to the vehicle body.
Attention Vehicle front traction eye 2. Slide in the direction to open the front traction ring cover with your thumb. 1. Remove the towing eye from the trunk. Emergency Treatment | 261