Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING sprocket, idler, guard) for damage, wear, loose bolts, or leakage of oil from 3 - 52 Walk-around Checks Before starting the engine, look aro und and under the machine to check for loo se nuts and bolts, or leakage of oil, fuel, or coolant, and check conditio n of the work equipment and hydraulic syste m. Also check for loo se wirin g and play , and accumulation of dust at p laces with high temperatures. Remove any flammable materials from a round the battery, engine, muffler, turbocharger, or other high temperatu re engine parts.

Leakage of fuel or oil will cause the mac hine to catch fire. Check carefully, be sure to repair any problem , or contac t your Ko matsu distributor. I f th e machine is at an angle, repos ition it level before checking. Perform the following inspections a nd cleaning every day before starting engin e for the day's work. 1. Check for damage, wear, play i n work equipment, cylinders, linkage, and h oses. Check that there are no cracks, excessive wear, or play in the work equipm ent, cylinders, linkag e, or ho ses. If any problem is found, repair it. 2. Remove dirt and debris from ar ound the engine, battery, and radiator.

f Check for dirt accumulated arou nd the engine and radiator.Also check for fla mmable material (dry leaves, twigs, etc.) around the battery, engin e muffler, turbocharger, or other high temperature engine parts. If any dirt or remove them. or lammable materials are found, 3. Check for coolant and oil leaka ge around the engine i Check for oil leakage from the e ngine and coolant leaks from the cooling sys tem. If any p roblem i s found, repair t. 4. Check for oil leakage from hydr aulic equipment, hydraulic tank, hoses, and Check for oil leakage. If any pr oblem is found, repair the area where oil is le 5. Check the undercarriage (track rollers. I f any problem is found, repair i 6.

Check for problems in handrail I f any problem is found, repair i 7. Check for problems in gauges and monitor t Check that there is no problem i n the gauges and monitor in the operator's c ab. If any problem is f ound, r eplace he parts. Clean off any dirt on the surface. 8. Checking window for damage a nd displacement age or displacement. If it is found broken or displaced, repair it. In particular, Check the window for any dam repairs must be made immedia tely, once stopping the machine, if the win dow is broken or displaced during . during operation. Do not attempt to co ntinue to operate the machine without repair