. OPERATION TRANSPORTATION OPERATION TRANSPORTATION 3 - 105 6. Turn the swi ng lock switc h ON to ap ply the swing 7. If the machi ne is equippe d with work equipment, s et the w ork equipment a t the front, an d travel for ward to load i t; if it has no work equipm ent, travel in reverse to Follow instr uctions and when traveli ng in reverse 8. Before movi ng onto the ra mps, mak e sure that the machin e is positioned i n a straight line with the ramps a nd that the er. vel slowly. the centerline of the machine matches t hat of the trail Align the dir ection of trav el with the r amps and tra vel slow Lower the w ork equipme nt as far as possible with out causing interference .
e ramps, operate only the travel lever. Do not other lever. When on th operate any other lever. 9. Stop the ma chine, when it takes a lev el posture rig ht above the rear wheels on the trailer bed. 10. Turn the swi ng lock switch OFF to rel ease the swin g lock, t hen swing the up per structure slowly 180 °. n the trailer. (A machine ) sition on the trailer. 11. Move the m achine forwa rd slowly o without work equipment w ill stay put 12. Stop the ma chine at the s pecified po sition on the