.
MAINTENANCE MAINTENANCE SCHEDULE 4- 56 4- 58 4- 59 4- 60 4- 61 4- 61 4- 61 4- 62 4- 63 4- 63 4- 63 4- 63 OF NITROGEN ACCUMULATOR (FOR CONTROL 4- 64 4- 68 4- 68 4- 69 4 - 15 CLEAN AIR CONDITIONER FRE SH/RECIRC FILTER REPLACE B REATHER ELEMEN T IN HYDRAULIC TANK EVERY 1000 HOURS MAINTENANCE CHANGE OI L IN SWING MACHI CHANGE OI L IN FINAL DRIVE C REPLACE H YDRAULIC OIL FIL CHECK ALL TIGHTENING PAR TS OF TURBOCHARGER CHECK PLA Y TURBOCHARGE EVERY 2000 HOURS MAINTENANCE CHECK PTO GEAR CASE, ADD CLEAN HYD RAULIC TANK STR CLEAN, CH ECK TURBOCHARG CHECK ALT ERNATOR, STARTI CHECK EN GINE VALVE CLEAR CHECKING CIRCUIT) GAS IN EVERY 4000 HOURS MAINTENANCE CHECK WATER PUMP CHECK WA REPLACE A CCUMULATOR (FO R CONTROL CIRCUIT) EVERY 5000 HOURS MAINTENANCE CHANGE OI L IN HYDRAULIC T MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER For machine equipped with a hyd raulic breaker, the hydraulic oil deteriorat es faster than for normal bucket di gging operations, s o set the maintenan ce intervals as follows .
Replace h ydraulic filter elemen t On a new machine, replace the element after the fi rst 100 to 150 hours, th en carry out furthe r replacement of the element ght. element according to the table on the ri Change oi l in hydraulic tank Change th e oil according to th e table on the right Replacing additional filter element for breaker (if equipped) Use a gui deline of 250 hours f or use of the breaker (operating ratio for th e breaker: 50 % or more), and replace the element ght. element according to the table on the ri