. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE NOTICE again from the inside. 1) Replace any outer element which has been cleaned 6 same time. has been cleaned. CAUTION 4 - 18 When cleaning cover (3 ), do not remove evacuator va 3. Clean the inside of the air cleaner body and the cover ( NOTICE The inner element mu st not be used again even after cleaning. When replacing the outer ele ment, replace the inner elemen t at the same time. 4. Direct dry compr essed air (Max. 0.69 MP a (7 kgf/cm2 , 99.4 ide of the outer element alo ng its folds. Then ssed air from the outside a long the fold s, and for 1 year.
Replace the in ner element at the inner and outer elements when the du st indicator red piston app ears soon after installin g the r element even though it h as not been cleaned 6 ti seal from the element whe never the el emen 5. If small holes or thinner parts are found on the element when it is checked by s the element. hining a light through it afte r cleaning, r eplace NOTICE When cleaning the elem ent, do not hit it or beat it aga inst somethi Do not use an element whose folds or gasket or seal are damaged Wrap unused element a nd store them in a dry place. When installing the cov er (3), check O-ring (7) and re place it if ther e are a ny scratches or damag 6.
Set the cleaned outer element in position, t hen secure cover (3 ) wit h mounting cli