. MAINTENANCE MAINTENANCE PROCEDURE adjust it again. Loosening Track Tension WARNING 4 - 26 Increasing Track Tension Prepare a grease pump 1. Pump in grease thr ough grease fitting (2) with a grease p ump. 2. To check that the tr ack tension is correct, run th e engine a t low idle, move the mac hine forward a distance equ al to the l ength of track on ground, then stop the machine. 3. Check the track ten sion again, and if t he tensio n is not correct, 4. Continue to pump i n grease until dimension (S ) becomes zero (0) . If the tension is still loose, th e pin an d bushing are excessively worn, s o they must be e ither turn ed or replaced.
Please contact you r Komatsu distributor for re pairs. It is extremely dangerous to release the greas e by any m ethod exce pt the If track tension is not relie ved by this procedure, contac t your Komatsu 1. Loosen plug (1) gra dually to release the greas e. one turn. 2. When loosening plu g (1), turn it a maximum of one turn. 3. If t he grease does not come out smoothly, mo ve the machine forwards and back wards a short distance. 4. Tighten plug (1). 5. To check that the tr ack tension is correct, run th e engine a t low idle, move the mac hine forward a distance equ al to the l ength of track on ground, then stop the machine. 6.
Check the track ten sion again, and if t he tensio n is not correct, adjust it again.