. MAINTENANCE MAINTENANCE PROCEDURE REPLACE BREAKER CIRCUIT ADDITIONAL OIL FILTER ELEMENT WARNING NOTICE 4 - 36 (If e quippe A fter the engine is stop ped, the part s and oil are at h igh t emperature, so there is danger of burn s. Wait for the tem perature to o down before startin g the operati W hen rem oving the cap from oil fill er port (F) , turn i t slowly to release the inter nal pressure, th en remove it carefu For details o f the replacem ent interval for the el ement, "MAINTENANCE I NTERVAL FOR HYDRAU LIC BREAKER (PAG P repare a container to catch th 1. Place a container u nder the filt er elem ent to catc h the oil. 2.
Turn filt er case (1) t o the left to remove i t, then tak e out elemen (2). Remov 4. Clean t he parts that were remo ved and 5. When i nstalling filt er case (1 tighteni ng torque gi ven below. Tighten Case ( 1): 58.8 to 7 8.5 N·m (6 t o 8 kgf· m, 43. 4 to 57.9 lbft) Plug (3 ): 39.2 to 49 .0 N·m (4 t o 5 kgf·m , 28.9 to 3 6.2