. MAINTENANCE MAINTENANCE PROCEDURE REPLACE ACCUMULATOR (FOR CONTROL CIRCUIT) WARNING the the a to 4 - 68 EVERY 4000 HOURS MAINTENA Maintenance for every 50, 100, 250, 50 0, 1000 and 2000 hour s service shou ld be carried out at t CHECK WATER Check that there i s no play in the pulley, l eakage of o il or water, o r clogging of t he drain hole. If any problem is found, please contact yo ur Komatsu distributor for repairs or replacem Replace the accu mulator every 2 years or every 40 00 hours, w hichever com The accumulator is charged with high-pressu re nitrogen g as, so mista ken operation m ay cause an explosion , which will lead to serious injury or da mage.
When handling the accumulator , always do as follows. The pressure in the hydraulic circuit cann ot be comple tely removed . When removi ng the hydraulic equip ment, do not stand in the direction t the operation. hat the oil spurts out whe n carrying ou t the operatio n. In addition, l oosen the bolts slowly when carrying out ble the accumulator. ear flame or dispose of it in fire. es in it or weld it. it, or subject it to any impact. Do not disassem Do not bring it n ear flame or dispose of it Do not make hol Do not hit it, roll it, or subject it to any imp When disposing of the accumulator, the gas must be released. Ple ase contact yo ur Komatsu distributor to have this work carried out.
If operations ar e continued after t dropped, it will be i he performance of t mpossible to release t accumulator has mpossible t remaining pressu re in the hydraulic circuit if there should be chine. Please ask your Komatsu distributor mulator. cuit if there failure on the ma replace the accu The accumulator is installed to the posit ion shown i on the right.