. ATTACHMENTS AND OPTIONS BUCKET WITH HOOK BUCKET WITH HOOK distributor. PROHIBITED OPERATIONS 6 - 4 HOOK CONDI Check that there is no damage to the hook, sto pper, or hook mount. If there is any problem , contact your K omatsu Operations with C are d the following loads when carrying out lifting d arm is installed: 700 kg (1544 lb) is installed: 500 kg (1103 lb) if the load sways excessively. Lower the engine rate the control levers slowly. ed of this machine is 3 to 4 times the speed of a Be particularly careful to check that the ea is safe when operating the swing. re is no damage to the hook, stopper, and hook problem is found, please contact your Komatsu e machine while lifting a load.
the operating posture, there is danger that the ay come off from the hook. To avoid these parts f, pay careful attention to the angle of the hook. not allow any person to come under or in the area d load. ith hook is turned and used for operations, it will ng dumping operations, be careful when using it. o be installed, please consult your Komatsu ning to newly install a hook, contact your Komatsu distributor. Do not excee operations. When standar When long arm It is dangerous speed and ope The swing spe mobile crane.
surrounding ar Check that the rate the control levers slowly ed of this machine is 3 to 4 ti Be particularly careful t ea is safe when operating the re is no damage to the hook, mount. If any distributor. Never travel th e machine while lifting a load Depending on the operating posture, there wire or pulley m ay come off from the hook. T o avoid these parts from coming of f, pay careful attention to the angle of the hook. In addition, do not allow any person to come under or in the area around a raise If the bucket w ith hook is turned and used f or operations, it will hit the arm duri ng dumping operations, be ca reful when using it. If a hook is t distributor.
If you are plan ning to newly install a hook, c ontact your Komatsu