. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT HYDRAULIC CIRCUIT Hydraulic Circuit Connection One Line Attachment attachment provided by the side, confer with each until the air in the attachment pedal repeatedly (approx. 10 times) to bleed the air. NOTICE air bleeding procedure for the and wait for at least 5 minutes before starting 6 - 14 When c onnecting the attachment, c onnect the hydraulic circuit as 1. Check that the stop valve is at th the plug. Be careful not to lose or damag e any part that is removed. 2. Connect the piping for the attachment maker. The dimensions on the stopper right. For those on the attach manufacturer of attachment an 3.
Afte 1) r connecting the piping, ble Start the engine, referring to 2) 3-68)", and run it at low idle Then proceed to the next w 2) Run the engine at low idle circuit is completely remove pedal repeatedly (approx. 1 I f th e at attachment itself, follow the specified p 3) operations. This will releas e the bubbles in the oil insid e th 4) Check that there is no oil le akage, and wipe off any oil that