. OPERATION DETAILED CONTROLS AND GAUGES Caution Monitors CAUTION (1) Charge level monitor (2) Fuel level monitor Charge Level Monitor This monitor (1) indicates a problem in the charging system while the engine is running. If the monitor lamp flashes, check the V-belt tension. If any problem is found, see "OTHER TROUBLE (PAGE 3-123)". REMARK This lamp will light up if the starting switch is turned ON when the engine is stopped, but this does not indicate any problem. When the engine is started or stopped with the starting switch at the ON position, the lamp may light up and the buzzer may sound momentarily, but this does not indicate any problem.
3 - 6 If the w arning monitor flashes, check the problem point as soon as possible and carry out maintenance. Failure to repa ir the proble m may c ause to failure o f the machine. These are items which nee d to be observed while the engi ne is running. If any problem occurs, items which need to be r epaire d as soon as p ossible are displayed. ash to indicate the location of the problem. If ther e is any problem, the appropriate monitor lamp will fl ash to indicate the location o f the